products

Test Data

Cold test

Measured temperature /
sample name
Protection against cold
102 103 104
-70℃ passed passed passed
-65℃ passed passed passed
-60℃ passed passed passed

Test request destination :Chemicals Evaluation and Research Institute
※ -70 ℃ is the limit measurements .
Test Date : September 20, 2005
Not detected most of the material , it has proven the safety of the Dairobu gloves .
Test Date : September 28, 2005 ( Unit : mg / ℓ)
A96 test Date : September 24 , 2014 ( Unit : mg / ℓ)
Test request destination :Chemicals Evaluation and Research Institute

Combustion gas test(JIS K 2541)

Test item / sample name
H202 550 5000 H40 102 104 H200
Hydrogen fluoride (HF) passed passed passed passed passed passed passed 0.1
Hydrogen chloride (HCl) passed 4.1 passed passed 1.6 1.8 passed 0.1
Hydrogen bromide(HBr) passed passed passed passed passed passed passed 0.1
Hydrogen cyanide (HCN) passed 0.22 0.25 0.16 0.12 0.059 0.012 0.005
Sulfur oxides (SOx) (SO₂ Conversion) passed passed passed 1.3 0.3 0.4 passed 0.1
Nitrogen oxide (NOx) (NO₂ Conversion) passed 1.7 1.4 1.2 2.2 1.7 4.6 0.5

①For solvent ②Antistatic ③Protection against cold ④For heat ⑤lower limit

800 is a test to burn at ± 50 ℃.
Test request destination :Chemicals Evaluation and Research Institute
Test Date : 16 Oct 2005 ( Unit : mg / g)

Analytical test

Test items
H202 20 102 104 H200
Material testing Cadmium and lead Limit below passed Limit below Limit below Limit below
Dissolution test Phenol passed passed passed passed passed
Formaldehyde passed passed passed passed passed
zinc passed passed passed passed passed
heavy metal passed passed passed passed passed
Evaporation residue ( water ) passed(10ppm) passed(36ppm) passed(18ppm) passed(5ppmbelow) passed(5ppmbelow)
Test items
H3 223 440 550 5500 H201 H202
Material testing Cadmium and lead passed Limit below Limit below Limit below Limit below Limit below passed
Dissolution test Phenol passed passed passed passed passed passed passed
Formaldehyde passed passed passed passed passed passed passed
zinc passed passed passed passed passed passed passed
heavy metal passed passed passed passed passed passed passed
Evaporation residue ( water ) passed(31ppm) passed(11ppm) passed(13ppm) passed(19ppm) passed(34ppmbelow) passed(5ppmbelow) passed(5ppmbelow)

①For oil ②For solvent ③For solvent ④Protection against cold ⑤For heat ⑥For solvent

Food , were tested in accordance with the third of the three rubber equipment or containers and packaging of D of the standard criteria of the additives,
etc. ( 1959 Ministry of Health and Welfare Notification No. 370 ) .

Dissolution test

Cl, analysis of the content of Br
Pb, cCd, T-Cr, analysis of the content of Hg
Test items
H3 20 440 550 5000 H202 102 103 104
Bromine ion (Br⁻) passed passed passed passed passed passed passed passed passed 0.1
Calcium (Ca) passed passed passed passed passed passed 0.3 passed passed 0.2
Chlorine ion (Cl⁻) passed passed 0.4 3.2 passed 0.2 1.7 3.1 1.1 0.1
Fluorine ion (F⁻) passed passed passed 2.4 passed 不検出 passed 不検出 passed 0.1
Sodium (Na) passed passed passed passed passed 0.1 passed 0.05 passed 0.05
Nitrate ion (NO₃⁻) passed passed passed passed passed passed passed passed passed 0.1
Phosphate ion (PO₄³⁻) passed passed passed passed passed passed passed passed passed 0.1
Potassium (K) passed passed passed passed passed passed passed passed passed 0.05
Copper (Cu) passed passed passed passed passed passed passed passed passed 0.1
Test items
H200 H4 H40 300 3000 A95 A96 A96以外 A96
Bromine ion (Br⁻) passed passed passed passed passed passed passed 0.1 0.1
Calcium (Ca) passed passed passed passed passed passed passed 0.2 0.1
Chlorine ion (Cl⁻) 0.1 passed passed 1.5 passed 0.2 0.2 0.1 0.1
Fluorine ion (F⁻) passed passed passed passed passed passed passed 0.1 0.1
Sodium (Na) 0.05 passed passed passed passed passed passed 0.05 0.1
Nitrate ion (NO₃⁻) passed passed passed passed passed passed passed 0.1 0.1
Phosphate ion (PO₄³⁻) passed passed passed passed passed passed passed 0.1 0.1
Potassium (K) 0.05 passed passed passed passed passed passed 0.05 0.1
Copper (Cu) passed passed passed passed passed passed passed 0.1 0.1

①For solvent ②Protection against cold ③For heat ④Antistatic ⑤For acid resistance and alkali ⑥lower limit

Not detected most of the material , it has proven the safety of the Dairobu gloves .
Test Date : September 28, 2005 ( Unit : mg / ℓ)
A96 test Date : September 24 , 2014 ( Unit : mg / ℓ)
Test request destination :Chemicals Evaluation and Research Institute

Ignition point test (ASTM E 659)

Test items H200
outer inner
Ignition point (℃) 448 429
Test request destination :Chemicals Evaluation and Research Institute
Test Date : September 20, 2005

Moisture permeability test(JIS Z 0208)

est items H3 For solvent Third-party
Moisture permeability (g / m 2 · 24hr) 2248 1824
Water vapor permeability coefficient (g · mm / m 2 · 24hr) 164 141

Test Date : July 28, 2004
Test request destination :Chemicals Evaluation and Research Institute

Breakthrough time measurement test(EVOH)

CAS NO. Solvent name Chemical formula *ASTM breakthrough time Indication
67-64-1 ※ acetone CH₃COCH₃ 8 hours undetected
27522 ※ acetonitrile CH₃CN 8 hours undetected
141-78-6 ※ Ethyl acetate CH₃COOC₂H₅ 8 hours undetected
109-89-7 ※ diethylamine (C₂H₅)₂NH 8 hours undetected
27639 ※ dichloromethane CH₂Cl₂ 8 hours undetected
25174 ※ dimethylformamide (DMF) (CH₃)₂NCHO 8 hours undetected
127-18-4 ※ tetrachlorethylene CCl₂₌CCl₂ 8 hours undetected
109-99-9 ※ tetrahydrofuran (THF) C₄H₈O 8 hours undetected
108-88-3 ※ toluene C₆H₅CH₃ 8 hours undetected
98-95-3 ※ nitrobenzene C₆H₅NO₂ 8 hours undetected
75-15-0 ※ carbon disulfide CS₂ 8 hours undetected
110-54-3 ※ n- hexane CH₃(CH₂)₄CH₃ 8 hours undetected
67-56-1 ※ methanol CH₃OH 315 minutes
7664-93-9 ※ 93.1% sulfuric acid solution H₂SO₄ 8 hours undetected
1310-73-2 ※ aqueous solution of sodium hydroxide 50% NaOH 8 hours undetected
872-50-4 N- methylpyrrolidone C₅H₉NO 8 hours undetected
512-56-1 Trimethyl phosphate (CH₃O)₃PO 8 hours undetected
67-63-0 Isopropyl alcohol (IPA) CH₃CH(OH)CH₃ 8 hours undetected
95-47-6 0- xylene C₆H₄(CH₃)₂ 8 hours undetected
78-93-3 Methyl ethyl ketone (MEK) CH₃COC₂H₅ 8 hours undetected
79-20-9 Methyl acetate CH₃COOCH₃ 8 hours undetected
67-66-3 Chloroform CHCl₃ 8 hours undetected
60-29-7 Ethyl ether C₂H₅OC₂H₅ 8 hours undetected
78-83-1 Isobutyl alcohol (CH₃)₂CHCH₂OH 8 hours undetected

Estimated : ◎ There is almost no problem even if Used Available Yes
* ASTM (American Society for Testing and materials American Society for Testing and Materials )
※ mark JIS T8116 defined standard test solution
( Our research )

Breakthrough time measurement test(Fluorine-containing rubber)

CAS NO. Solvent name Chemical formula *ASTM breakthrough time Indication
67-64-1 ※ acetone CH₃COCH₃ 8 hours undetected
27522 ※ acetonitrile CH₃CN 8 hours undetected
141-78-6 ※ Ethyl acetate CH₃COOC₂H₅ 8 hours undetected
109-89-7 ※ diethylamine (C₂H₅)₂NH 8 hours undetected
27639 ※ dichloromethane CH₂Cl₂ 8 hours undetected
25174 ※ dimethylformamide (DMF) (CH₃)₂NCHO 8 hours undetected
127-18-4 ※ tetrachlorethylene CCl₂₌CCl₂ 8 hours undetected
109-99-9 ※ tetrahydrofuran (THF) C₄H₈O 8 hours undetected
108-88-3 ※ toluene C₆H₅CH₃ 8 hours undetected
98-95-3 ※ nitrobenzene C₆H₅NO₂ 8 hours undetected
75-15-0 ※ carbon disulfide CS₂ 8 hours undetected
110-54-3 ※ n- hexane CH₃(CH₂)₄CH₃ 8 hours undetected
67-56-1 ※ methanol CH₃OH 315 minutes
7664-93-9 ※ 93.1% sulfuric acid solution H₂SO₄ 8 hours undetected
1310-73-2 ※ aqueous solution of sodium hydroxide 50% NaOH 8 hours undetected
872-50-4 N- methylpyrrolidone C₅H₉NO 8 hours undetected
512-56-1 Trimethyl phosphate (CH₃O)₃PO 8 hours undetected
67-63-0 Isopropyl alcohol (IPA) CH₃CH(OH)CH₃ 8 hours undetected
95-47-6 0- xylene C₆H₄(CH₃)₂ 8 hours undetected
78-93-3 Methyl ethyl ketone (MEK) CH₃COC₂H₅ 8 hours undetected
79-20-9 Methyl acetate CH₃COOCH₃ 8 hours undetected
67-66-3 Chloroform CHCl₃ 8 hours undetected
60-29-7 Ethyl ether C₂H₅OC₂H₅ 8 hours undetected
78-83-1 Isobutyl alcohol (CH₃)₂CHCH₂OH 8 hours undetected

Estimation: ◎ Available 〇 Available for short-term work to prevent scattering ✕ Unusable for single use
“Sulfuric acid 96% solution” “Sodium hydroxide aqueous solution 30%”
Test request destination: Chemicals Evaluation and Research Institute
Others examined by our company
* ASTM (American Society for Testing and Materials American Materials Testing Association)
※ mark indicates the standard test solution specified in JIS T 8116