products

PRODUCTS

DAILOVE 301H

Cold weather performance and electrostatic measures gloves.

○Gloves that combines ESD protection
○Excellent protection against the cold in an environment of up to about -5 ℃.
○Excellent thin workability compared to the same type of 350H.
○Electrical resistance value is103-107Ω
*In gloves single, static electricity measures impossible. Clothes, shoes, when you use the Static Control Products relates to a floor gloves effective match.

Using a special urethane rubber which gave conductivity. Possible countermeasure against static electricity.
By missing on the ground through a glove, removing the static electricity accumulated in the contact material.
Since the winter gloves, suitable for working in the cold outdoors.

Example of use

○Suitable for work dealing with petroleum in a cold environment.
○Handling of petroleum in the tanker cars and petrol station.


  • Static electricity

  • Oil

information

  • Ambient temperature

    Low temperature

  • Material

    Polyurethane

  • Primary use

    Static electricity

  • Category classification

    Electro-static Discharge and Solvent

  • Material

    Surface:Polyurethane
    lining:Brushed+Conduction

  • type

    Single layer
    Anti-static

  • size

    Lw:260㎜

  • The thickness

    2.05㎜

  • Caliber

    -

  • Surface shape

    Particle

  • color

    black

  • Price / double

    ¥2,600

  • Packaging

    bag:1Phase
    Inner box:10Phase
    Outer case:10Phase×5box

Product dimension

size A B C D E F
Lw 260 150 120 80 41 120

■C is measuring the position of about 20cm from the middle finger destination.
■F shows around the palm of the hand.
■E the thickness of the fingers. Near the center of the finger.
■B, C, E, the dimensions of the F numerical was flattened to the site.
■may vary with the above dimensions for improvement.
■Unit (mm) Display

Notes on use

■Only gloves there is no effect of the ground wire. It requires comprehensive static measures, including clothes, shoes, floor and the like.
Not used in a state where the glove is insulated.
■Via the thumb portion inside the conductive fiber, which is energized to the surface. Always used in a state in which the thumb is in contact with the conductive fiber.
■Handled substance and (oil, solvents, paints, etc.) is attached to the gloves, the electrical resistance value will vary. The oil and solvents may not energized to leave soaked in gloves. To verify that the electrical resistance during use and prior to use is within the specified range.
■If the gloves are not energized contaminated with oil or solvents are not used.
■If it is swollen with an organic solvent or the like, since the general resistance value tends to fluctuate attention.
■Because of the risk of ignition, do not close the gloves on fire after handling flammable substances.
■Because of the risk of electric shock, do not use the electrical work.
■Solvents and chemicals that can be dealt with by product is different. SDS of solvents and chemicals used the (safety data sheet) to check the ingredients. To confirm whether or not to use in the service agent area swelling capacity table.
■Not be used for acids and alkalis.
■Transmission at gas shape can not be prevented. Applying a protective cream. Gloves for the transparent protection (DAILOVET2-D, T2-F, 730) should be worn. To provide protection of the hand from the permeate.
■After using the oil or solvent may gas evaporated from the glove when left in a room is filled. Store from dried.
■After use to shade to wash the dirt and liquid. A long period of time, deterioration is accelerated and allowed to stand in the sun. By thoroughly dried, store in well-ventilated place to avoid direct sunlight.

Similar product