Thick type of DAILOVE H4.

○Gloves that combines ESD protection
○Electrical resistance value is103-106Ω
○There are solvent resistance.
*In gloves single, static electricity measures impossible. Clothes, shoes, when you use the Static Control Products relates to a floor gloves effective match.

Workability in excellent electrostatic measures gloves. Physical strength is high because there is thicker than DAILOVE H4.
Using a special urethane rubber which gave conductivity. Possible countermeasure against static electricity.
By missing on the ground through a glove, removing the static electricity accumulated in the contact material.

Example of use

○Work and dealing with a flammable solvent, Suitable for use in the field you are affected by the static electricity.
○Wiping of dirt, such as printing equipment.
○Shatterproof when handling solvents.
○Shatterproof of the solvent in the coating industry.
○Handling of products that hate the generation of static electricity, such as a semiconductor.

  • Static electricity

  • Printing

  • Precision machinery

  • Machine

  • Shatter-proof

  • Oil


  • Ambient temperature

    Normal temperature

  • Material


  • Primary use

    Machine parts cleaning
    Shatterproof solvent
    Clean room

  • Category classification

    Electro-static Discharge and Solvent

  • Material


  • type


  • size


  • The thickness


  • Caliber


  • Surface shape


  • color


  • Price / double


  • Packaging

    Outer case100Phase

Product dimension

size A B C D E F
300 135 111 70 30 97
M 300 137 115 75 36 113
L 300 150 124 79 36 121
LL 300 152 127 92 41 129

■C is measuring the position of about 20cm from the middle finger destination.
■F shows around the palm of the hand.
■E the thickness of the fingers. Near the center of the finger.
■B, C, E, the dimensions of the F numerical was flattened to the site.
■may vary with the above dimensions for improvement.
■Unit (mm) Display

Notes on use

■Only gloves there is no effect of the ground wire. It requires comprehensive static measures, including clothes, shoes, floor and the like. Not used in a state where the glove is insulated.
■Handled substance and (oil, solvents, paints, etc.) is attached to the gloves, the electrical resistance value will vary. The oil and solvents may not energized to leave soaked in gloves. To verify that the electrical resistance during use and prior to use is within the specified range.
■If the gloves are not energized contaminated with oil or solvents are not used.
■Because the film is thin, sufficiently attention to sharp objects.
■If it is swollen with an organic solvent or the like, since the general resistance value tends to fluctuate attention.
■Because of the risk of ignition, do not close the gloves on fire after handling flammable substances.
■Because of the risk of electric shock, do not use the electrical work.